Where possible and in most cases all walls should be constructed to match the existing brickwork,
stone or rendered finish construction of the existing property and have an insulated cavity wall !
With a choice of brickwork on both sides, or brickwork externally and the use of internal insulated
blockwork and plastered.

Compared to a single skin-wall which most window companies build, this has a 'U' value
of 3.1 W/m²K, and a insulated cavity wall of 0.5W/m²K. More than a 600% improvement in
insulation is effectively achieved by using this method !

The internal conservatory floor can be float finished or screeded, and can be fully insulated to further
increase insulation values. A uninsulated has a 'U' value of only 1.5 W/m²K, but if you add a 25mm
insulation to this it drops to 0.8 W/m²K, whilst a 50 mm insulation achieves a 0.55 W/m²K - that
equates to nearly a 300% improvement. (Figures approximate based on a conservatory floor of 3m Sq)

With Hawthorns Conservatories having a construction and engineering background, you can rest
assured that regardless of the size, type or design of your chosen conservatory, we will treat each
individual building, property and installation with the utmost respect . .
. . and whilst every conservatory we build and install contains the same principles - it is a fact that the
ground your property resides on will be slightly different in one form or another than one just round
the corner. With this fact in mind we always have open mind and a fresh approach to every new
customer, order and conservatory which we are about to install !

Below is an example of a conservatory base under construction . .